Industrial Air Cooler & HVLS Fan Manufacturer Ahmedabad

Ahmedabad's manufacturing belt runs from the automobile and engineering plants at Sanand and Changodar through the chemical, dye and pharmaceutical units of Vatva and Naroda, out to the packaging and engineering sheds at Odhav and Aslali. Almost all of it operates under sheeted roofs that trap radiant heat from March onward, and by peak summer shop-floor temperatures routinely sit several degrees above the outdoor reading. Air Care System & Solution India Pvt. Ltd. supplies industrial air coolers, evaporative air cooling systems, HVLS fans, factory fabricated ducting and industrial exhaust systems to these plants from our own manufacturing facility, with design, fabrication, installation and post-commissioning service handled by one team.

What makes Ahmedabad unusually well suited to evaporative cooling is its pre-monsoon air. Between March and mid-June the city sees very low relative humidity alongside extreme dry-bulb temperatures, which is exactly the condition under which a direct evaporative cooler delivers its largest temperature drop at a fraction of the running cost of refrigerant air conditioning. We size every Ahmedabad installation against that seasonal profile rather than against a generic national design condition, and we tell customers plainly when a hybrid or indirect system will serve them better through the monsoon weeks.

Design Conditions for Ahmedabad

The wide gap between dry-bulb and wet-bulb temperature during Ahmedabad's summer means a well-maintained direct evaporative cooler can pull supply air down substantially below ambient while introducing 100% fresh outside air. For units that must hold conditions through the humid July-September window, we specify indirect-direct (IDEC) systems or an Oxycom adiabatic stage so cooling performance does not collapse when the monsoon sets in.

Our Product Range for Ahmedabad

Our industrial air coolers and direct evaporative coolers are the workhorse product for Ahmedabad. In the city's dry pre-monsoon air they deliver their maximum temperature drop while supplying 100% fresh filtered outside air, at a running cost far below refrigerant cooling for the same floor area. Units are available in capacities suited to single workstations up to whole-shed installations. Read more about Industrial Air Coolers & Evaporative Coolers (DEC).

For plants at Sanand, Vatva and Naroda that need cooling to continue through the humid monsoon weeks, we supply two-stage evaporative and indirect-direct (IDEC) systems. The indirect stage cools without adding moisture, so performance does not collapse when relative humidity climbs, and the Oxycom adiabatic range extends this further for higher-duty applications. Read more about Evaporative Air Cooling Systems & IDEC.

HVLS fans cover very large floor areas from a single unit at low power draw, which suits Ahmedabad's wide-span engineering, packaging and warehousing sheds. Aerofoil aluminium blades, Nord motor and gearbox and Danfoss VFD control give reliable low-noise operation, with reversible running for seasonal use. Read more about High Volume Low Speed Fans (HVLS Fans).

We manufacture factory fabricated hollow profile, rectangular, round, oval and spiral ducting in GI, stainless steel and aluminium, delivered to your Ahmedabad site ready for assembly. Factory fabrication gives consistent seam quality and lower leakage than site-built ductwork, and cuts installation labour significantly. Read more about Factory Fabricated Ducting & Metal Ducting.

Chemical, dye and foundry operations across Vatva, Naroda and Odhav need capture at source. We design fume extraction hoods, flue gas exhaust systems and industrial exhaust fans as a complete path from hood to discharge, with duct material selected against the actual chemical and thermal exposure. Read more about Industrial Exhaust & Fume Extraction Systems.

Industrial Areas We Serve in Ahmedabad

Our supply, installation and service coverage across Ahmedabad, Gujarat includes:

We also cover Gandhinagar, Vadodara, Rajkot, Mehsana, Anand, Nadiad from the same team.

Applications by Industry in Ahmedabad

Frequently Asked Questions – Ahmedabad

Do you manufacture industrial air coolers or only supply them?

We manufacture. Air Care System & Solution India Pvt. Ltd. has been designing and building industrial cooling and ventilation equipment since 1990, with manufacturing facilities in Pune, Hyderabad and Tirunelveli, and we supply Ahmedabad plants directly from our own production rather than trading bought-in units.

Which is better for an Ahmedabad factory - evaporative cooling or air conditioning?

For most manufacturing sheds in Ahmedabad, evaporative cooling is the better answer. The city's dry pre-monsoon air lets a direct evaporative system deliver a large temperature drop at roughly a fraction of the power a comparable refrigerant system would draw, while supplying 100% fresh air. Air conditioning still makes sense for enclosed process areas with tight temperature and humidity tolerances, and we design both.

Can you install HVLS fans in an existing shed without stopping production?

Yes. HVLS fan installation is normally planned around your shutdown or weekend window and typically takes a day or two per fan including structural fixing, wiring and VFD commissioning. Our engineers survey the roof structure and existing services first so nothing is discovered mid-installation.

Do you supply factory fabricated ducting to Ahmedabad, or is it fabricated on site?

Factory fabricated. Hollow profile, rectangular, round, oval and spiral ducting is produced on our machines to the approved drawing, then delivered to your Ahmedabad site for assembly. That gives you consistent seam quality, lower leakage and far less on-site labour and rework than hand-fabricated ductwork.

What is the typical lead time for an Ahmedabad project?

It depends on scope, but a standard evaporative cooling or HVLS fan supply is usually delivered within a few weeks of drawing approval, and turnkey ducting and HVAC packages are scheduled against your project programme. We confirm a dated schedule at the time of order rather than after it.

Peak summer dry-bulb	42-44°C (May)
Design wet-bulb	approx. 24-25°C
Pre-monsoon relative humidity	20-30%
Recommended primary system	Direct evaporative cooling (DEC)

Industrial Air Cooling & Ventilation Systems in Ahmedabad

Manufacturer and supplier of industrial air coolers, evaporative air cooling systems, HVLS fans, factory fabricated ducting and industrial exhaust systems for Ahmedabad, Gujarat.

Design Conditions for Ahmedabad

Our Product Range for Ahmedabad

Industrial Areas We Serve in Ahmedabad

Applications by Industry in Ahmedabad

Frequently Asked Questions – Ahmedabad