Industrial Exhaust System & Air Cooler Supplier Kanpur

Manufacturer and supplier of industrial air coolers, evaporative air cooling systems, HVLS fans, factory fabricated ducting and industrial exhaust systems for Kanpur, Uttar Pradesh.

Kanpur's industrial base is older and heavier than most of the cities we serve: the tanneries and leather works of Jajmau, the engineering and plastics units of Panki, Dada Nagar and Fazalganj, defence and ordnance manufacturing, fertiliser and chemical plants, and a long-established textile sector. Air Care System & Solution India Pvt. Ltd. supplies industrial exhaust and fume extraction systems, evaporative air coolers, HVLS fans and factory fabricated ducting to this belt.

In Kanpur the ventilation problem usually comes before the cooling problem. Tanning, chemical processing, plating and foundry operations generate fumes, vapour and heat that have to be captured at source and removed on a designed path, and no amount of general cooling substitutes for that. We treat extraction as the primary system in most Kanpur enquiries and then layer evaporative cooling and air movement on top, sized against the make-up air the exhaust system demands. Doing it in that order is what keeps both systems working.

Design Conditions for Kanpur

Where a process releases fumes, vapour or heat, extraction capacity and make-up air quantity have to be calculated together. Air removed from a building must be replaced, and if it is not replaced deliberately it will be pulled in through gaps at whatever temperature and cleanliness the outside happens to offer. In Kanpur we design the exhaust hood, duct route and fan first, then use the required make-up air volume as the basis for the evaporative cooling stage, so the two systems reinforce each other instead of competing.

Our Product Range for Kanpur

Direct evaporative coolers suit Kanpur's dry pre-monsoon summer well, and they have a second role here: because they supply 100% fresh outside air, they can serve as the designed make-up air source for the extraction systems that most Kanpur plants need anyway. Read more about Industrial Air Coolers & Evaporative Coolers (DEC).

Indirect-direct evaporative and adiabatic systems are specified where a Kanpur facility must hold conditions through the monsoon, or where added moisture would be a problem for the process - a real consideration in leather finishing and certain chemical operations. Read more about Evaporative Air Cooling Systems & IDEC.

HVLS fans cover the large machining halls, ordnance workshops and textile floors typical of Panki, Dada Nagar and Fazalganj, moving very large air volumes at low power and replacing banks of small fans that individually achieve little. Read more about High Volume Low Speed Fans (HVLS Fans).

Duct material selection is the critical decision in Kanpur. We manufacture factory fabricated ducting in GI, stainless steel and aluminium and choose against actual exposure - tannery and plating atmospheres will destroy an under-specified duct within a season or two. Read more about Factory Fabricated Ducting & Metal Ducting.

Industrial exhaust and fume extraction is our lead system for Kanpur. We design capture at source over tanning drums, plating and pickling lines, furnaces and welding stations, size the make-up air to match, and plan a discharge point that does not return contaminants to the site or a neighbour's intake. Read more about Industrial Exhaust & Fume Extraction Systems.

Industrial Areas We Serve in Kanpur

Our supply, installation and service coverage across Kanpur, Uttar Pradesh includes:

We also cover Lucknow, Unnao, Fatehpur, Jhansi, Etawah, Prayagraj from the same team.

Applications by Industry in Kanpur

Frequently Asked Questions – Kanpur

Can you design a fume extraction system for a tannery or plating line?

Yes. Hot air fume extraction and flue gas exhaust systems are part of our core range. For tannery and plating applications we pay particular attention to capture velocity at the hood, duct material selection for a corrosive wet atmosphere, and a discharge point that does not simply return the fumes to another part of the site.

Why does my exhaust system underperform even though the fan is large enough?

In most cases we find on site it is a make-up air problem, not a fan problem. If there is no designed inlet path for replacement air, the fan works against building pressure and moves far less than its rated volume. Correcting this usually costs less than replacing the fan.

Do you supply evaporative coolers for Kanpur factories as well as exhaust systems?

Yes, and the two work well together. Kanpur's dry pre-monsoon summer suits direct evaporative cooling, and because an evaporative system supplies 100% fresh outside air it can also serve as the make-up air source for your extraction system. We size the pair together.

What duct material do you recommend for corrosive environments?

It depends on what is in the airstream. We manufacture in GI, stainless steel and aluminium and select on the basis of the actual chemical exposure, temperature and humidity rather than defaulting to the cheapest option, because a duct that corrodes through in two seasons is not a saving.

Do you handle installation in Kanpur or supply only?

We handle installation and commissioning through our own project team, and we also take turnkey responsibility for ventilation, ducting and MEP packages where a customer prefers a single point of accountability.

Peak summer dry-bulb	44-45°C (May-June)
Design wet-bulb	approx. 26-27°C
Seasonal humidity swing	20-30% pre-monsoon, 75-85% monsoon
Recommended primary system	Source extraction + make-up air, with DEC and HVLS for comfort